|Item :||Injection and aspiration needles and accessories|
Needles are produced in many different sizes and must be handled with absolutely no damage to the sharp point. Needles and plastic parts (Hub & Cap) are fed & oriented, assembled, glued and siliconized, inspected with various systems on a typical assembly machine. Failed assemblies are pneumatically ejected into a reject bin, while completed Needles are accumulated and then output into trays as a final station of the procedure.
Unique systems for transfer & assembling of the machine allow very high-speed & accurate operation as well as no-damage to components including sharp point.
Out-put of the machine is 46,000~62,000 Needles per every hour and can be increased by upskilling of operators.
l Available with various types of Epoxy Bonds using
l Very High Assembly Resolution
l Higher Assembly Quality
l Automatic Operation
l Accurate & High Speed
l Superior Durability
l Minimize production coast by excellent speed & durability of machine
Dimension aprx. 7,150 x 4,000 x 1,800mm (L x W x H)
Weight aprx. 2,900Kg
Electricity AC 3Px220/380V, 20Kw/H
Air Consumption About 1,300L/min, 6Kg/Cm2
Production Capacity 46,000 ~ 62,000Pcs/Hour
Available Production Sizes 16G to 31G
Main Frame Material SS41 Cr Hard Coating & AL6061
Bonding Methods Wheel Type by Servo Controller
Epoxy Drying Heater Tunnel, 100~110°C
Silicon Coating Dipping Type
Hub Corona Treatment Installed
Auto Production Counter Installed
Inspection Items Damaged point, Bend, Blockage, Reverse, No-Cap etc.
Transfer Jigs 400 pcs
Number of Workers 2 persons