GENERAL
NO-BLAST can be applied to just about any rusted iron or steel surface.
It converts rust into a protective layer and protects against future corrosion.
NO-BLAST contains two active ingredients, orthophosphoric acid and oxidizing agent which will react with rust (iron oxide) and chemically converts it to a dark-colored stable material to provide a protective layer.
Because it’s water based, NO-BLAST is environmentally safe, non-flammable, odorless and safe to use.  Applications for NO-BLAST include ; vehicles, trailers, fences, iron railings, sheet metal, outside of tanks, lawn equipment, vessel, iron bridge, iron structures, plant, transportation vehicles and more.
 

CHARACTERISTICS
- Ecological (No VOC Gas)
Nonvolatile and no harm to the environment and to workers  
- Easy to Use
Simple painting with no need of skilled labor
- Time & Labor Saving
Applicable on existing rust to omit the pre-requisite rust removing before primer painting

■ NO-BLAST : Application -> Top painting
■ PRIMER : Rust Removing ->Water Cleansing->Primer Painting->Top Painting

4)  Superiority in Quality
Superior to conventional primer products in rust inhibition, durability and adhesion strength.
5) Competitiveness in Cost
NO-BLAST costs only 30% of average shot blasting per SQM
 

STORAGE, DIRECTIONS & WARNING
- Storage
· Avoid exposure to the fire, sunlight and keep in dark and dry place
· Store in an airtight container at room temperature ( -5~ 35˚C )
· Do not store in steel or metal containers
· Storage term to be 12 to 18 months

- Directions
· Shake well before the use
· Remove foreign substances and oil on the steel surface before application
· Secure the surface dry
· Remove the loose rusts with wire brush
· Paint 1~2 time(s) using sprayer or brush
· Do not work under 5˚C and/or humidity over 90%
· Coating thickness 15-20㎛
· Recommended amount one litre per SQM
· Dry away at least 12 hours before next painting
  (The interval can be extended beyond 12 hours when coating after shot-blasting)

- Warning
· Keep out of reach of children
· Do not use mixed with other products
· Wear gas-mask, protective gloves and goggle during the work
· Do not use the used-containers for other purposes
· Change air frequently when working in closed area

SPECIFICATION
· Color  :  Light Green
· Converted Layer Thickness : 10-15㎛
· Capacity : 15-20 SQM / L
· Specific Gravity ( g/㎤) : 1.275
· Time Required for Drying : 4Hr (Incipient ) – 12 Hr (Full Drying)
· Surface after Application : Not Glossy ( When Dried )
· Preparation : Remove Loose Rust and Oil on The Area To Be Coated
· Maximum Allowed Surface Temperature : 200˚C
· Solubility : Water-Soluble
· Diluter : Not Needed
· Flash Point : None
· Principal Ingredient : Chemically Active Agents, Desalted Water
· Compatible Paint Category : All Categories- For skin contact, flush with water