[Features]

• Various Colors

It has strength, solidity, and lightness comparable to fiberglass. It is stronger by 20 times and lighter by 5 times than the plaster bandage and lighter by 85% than fiberglass.  

• Good Elasticity 

Duk-In Lite “Poly” is made with the ideal polyester structure so that it is extended horizontally, vertically, and diagonally. A curved part needs to be wrapped around well. 

• Incinerability

Duk-In Lite “Poly” can be incinerable after use so that it doesn’t have to be buried into the ground. 

• Good Numerical Stability 

Duk-In Lite “Poly” has little contraction so that another procedure is not done due to the squeezing problem after a procedure. 

• Good X-Ray Penetration 

Duk-In Lite “Poly” has the good X-ray penetration rate.  

• Convenient Procedure 

It is not sticky with the use of a special lubricant. It shows the good finishing touch.

[How to Use]

1. Put Stockinette on the part to undergo the procedure and wind the cotton bandage around it.

2. Be sure to put on gloves to open Duk-in Lite "Poly". Dip it in the water at the room temperature for about 5 to 10 seconds. Remove the water.

3. Roll and wind it around the diseased area with 1/2 to 2/3 overlapped.

4. Wind it threefold or fourfold around the general part and fivefold or sixfold around the part supporting the body weight.

5. It can be set 3 to 15 minutes after a procedure. The weight can be fully supported 20 minutes after the setting.

6. If it is kept in the no more than 24°C dry place, the expiry is 2 years. Be careful not to make a hole since it is hardened if there is a hole in the closed package.

[Specifications]