AIS3000 is a mobile press fitting measurement device that measures the residual pressure nondestructively. The device is based on a measurement theory of comparing the differences of the load-displacement curve, which is based on the presence of the residual pressure in the test materials, to measure the residual pressure within the resources. Compared to the previous method, the device has reproducibility and is able to measure accurate values. It also has a press that presses in less than 200㎛, so measurements can be done without damage to the resources. AIS3000 is composed of a measuring body , analyzing software and a notebook.
Features
- Nondestructive residual pressure evaluation system
- Portable movable type testing device
- Possesses emergency blocking module in case of system damage caused by shock or heavy load
- Possesses prevention function of location deviation using a Limit Sensor
- All-in-One System (maximum load of 300Kg)
- Possesses high-quality load and displacement sensor for highly accurate weight realization
- Uses lightweight portable batteries (10hr) to supply power even in difficult locations
Specification
- Model: AIS3000
- Size (weight): 180 x 180 x 430 mm (7 kg)
- Maximum load weight: 300 kgf
- Resolving power: 5.6 gf / 0.1 um
- Maximum feeding distance: 40 mm
- Rate of loading: 0.05 ~ 20 mm/min
- Communication method: RS-422
- Data processing speed: 100/sec
Others
- Analysis device: Laptop PC (w/SW)
- Press fitting device: Old type press fitting device (WC), (Dia. 0.5 / 1.0 mm)
Vickers indenter
- Attached instruments (Field): Multiple curvature magnet, plated magnet, weight lightened chain, U-block (3~6 inch), V-block (3/4~3 inch)
- Attached instruments (Lab): X-Y axis stage Plate / Clamping jig