Option 04_ Bubble
Main body, 1 product bracket, 4 wires, 1 ceiling bracket, 4 fixing screws, 8 fixing pieces
There may be some errors depending on the measurement method.
There may be differences in color depending on the monitor.
model name : Bubble A8 Pendant
power : 15W
material : Aluminum, Mullbau, LG Chemical Polycarbonate Samsung LED, CHIP (S4), KS certified converter (ballast)
size : (W)728.4mm X (D)112.4mm X (H)76mm
Color temperature : 3,000K / 5,700K / 5,000K(Mixed type)
color : Pearl Gray (similar to champagne gold)
Country of manufacture : Republic of Korea
KS certification, Flickr free, 5 year free AS, domestic, free return, nationwide installation, self-design
How to install the product
Please check before installation. Be careful the electric shock !!
Prepare the insulated gloves, drill, etc.
Turn off the power breaker.
Check two power lines on the ceiling.
Do not install in a humid or leaking area.
Do not install with wet hands. There is a risk of electric shock.
1.Checking the components
(1)Check the components first. Product, 4 pieces
2.Diffusion plate separation
(2)Press the PUSH part of the sticker to remove the diffuser plate block.
*Depending on the size of the product, the location and quantity of blocks to be removed are different.
3.Removing the fixing Screw
(3)Loosen and remove the screws shown in the illustration.
4.Removing the brackets
(4)Remove the bracket attached to the back.
(5)Fix the bracket to the ceiling with 4 pieces.
*The wires can be inserted into the center hole of the bracket or pulled aside as shown in the picture.
(6)Connect the wires one by one as shown in the picture.
(7)Insert the bracket into the hole where the screw was removed as shown in the picture and fix it with the screw.
(8)Insert the removed block again and turn it on.
* It is recommended that a qualified electrician install the product.