1. Simple application
1) Easy to apply like painting. The coating can last for 1-2 years
2) Also easy removal by water spraying
2. Cost effective
1) Small amount of liquid coating can apply for decent size of window
2) Every 260ml bottle is applicable for 6-8sqm of glass
3. Excellent performances
1) Sun shield white : UV block 99%, IR block 92%, VIS transmit. 31%, Opaque, SC 0.49
2) Average reduction of cooling energy cost : 30%~40% (reduction USD 30~40 reduction monthly)
4. How to use
1) Clean the window with a detergent before applying.
2) Please wait for the window until dry. Once it is fully dry, please shake the product well and pour the solution (blue liquid) into the tray.
3) Then apply the solution (blue liquid) with a roller to the interior window surface with multiple x-layers (before it gets dry) to avoid any marks.
4) Please apply the solution (blue liquid) thickly in order to have greater protection against the harsh effects of the ultraviolet (UV) and also more easier to remove later if needed.
5) Due to the possible strong heat during installation, it is widely recommended that the product to be applied in the morning or evening when there is a less direct sunlight to avoid the product being dried too quickly during the installation.
6) If the masking tap is used during the installation, the tape should be removed before the solution/liquid gets dried out so that the edge do not get tore off during removal.
7) Please make sure the room is ventilated when closed.
8) When removing the product, please spray the water sufficiently over the area you would like to remove then wait until the water is being absorbed completely. Then peel off the product from the edge.
9) Please do not apply the solution when the weather is humid or rainy, otherwise it can be hazy.