BR-10S Control is a micro-processor-based automatic switch control which includes the
automatic sectionalizing functionality, and can interface with the automatic switch such as pole
mounted load break switch or sectionalizer installed on low and medium voltage overhead
distribution networks. The BR-10S control is connected to the automatic switch to measure the
voltage and current in the distribution line using voltage and current sensor built in the switch to
detect faults on the distribution network. The BR-10S control perfectly interacts with the
substation's circuit breaker (Reclosing Relay) on the distribution networks to perform highly
reliable fault detection. The BR-10S control is an integrated device that measures the voltage and
current of the distribution line and generates various information based on these measured
values, and performs functionalities such as fault detection, auto-sectionalizing, communication,
status monitoring and control of the automatic switch, etc. It provides high connectivity and best
performance with reasonable prices.
The BR-10S Control is an integrated device including not noly falut detection, isolation,
measurement, communication, remote and site control, and monitoring for switch and distribution
lines but also auxiliary power, battery and charger. It provides a high price-performance ratio and
connectivity when it is integrated to distribution automation system. It provides user-friendly
operations through control front panel and operating program. It does not ask users for
complicated settings. It has a high connectivity supporting a variety of networks and protocols for
automation. When crews patrol, they can easily check the device conditions through an external
- Integrated device
- Phase & Ground fault detection and SEF detection
- Inrush restaint
- Voltage and current unbalance
- Metering current for three phases, neutral or sensitive ground
- Metering phase Voltage for three pahses of both sides
- DNP 3.0 or IEC 60870-5-101
- Save 8 malfunction and inrush current waveforms.
- Self diagnosis
- Recording total 1,024 functional and system events
- Control front panel & Maintenance ports for current operation.
- Proving operating program.
0 / 4000
At least 10~1000 characters.