It is a sensing system that combines both the conveniences of Automatic Transmission and Economic viability of manually geared system. The system is equipped with a button at the hand knob of the gear shifter that will push, pull and release when you press it. You do not need to step on the clutch pedal, and you will feel the same effect as driving an automatic vehicle. Keep the gear at the first position and when you move the foot from brake pedal, the vehicle will slide smoothly forward. When you press the brake pedal any time, the vehicle will stop but the engine will not. It works just like an automatic vehicle. No matter what position the gear may be on, the vehicle can come to a stop by stepping on the brake pedal while driving. During traffic jams, it has a smooth start and stop without jerking and the engine will never stop even with sudden starts or brakes.
1. No-clutch function: Like an automatic vehicle, the start and stop motion can be performed with only the accelerator and brake without using the left foot as manual geared vehicles. Therefore The physical effort is reduced while driving.
2. Economic Viability: The fuel consumption is 15% less compared to a manually geared vehicle and 30% lower than automatic one.
3. Environment concern: The air pollution due to automobile exhaustion is reduced, the system contribute to the environmental protection.
4. Interchange of manual and auto clutch mode: Whenever the system is turned off, it changes to manual mode.
5. Target vehicles: Installation is possible in all kinds of manual-geared vehicle. (Cars, jeeps, trucks, buses, etc)
-Mechanical part : motor : 12–24V, 7–15A, 50 kg/cm
-Electronic part : DC 12–24V
1st photo: Motor actuator installation feature for over 2.5 tons trucks and buses. Installed on the sash between front wheel.
2nd photo: Clutch pedal operation type for over 2.5 tons trucks and buses, trailers,farm tractors.
3rd photo: Cable operation type that pull and return the release poke of the manual tansmission. Provided under 1.3 liters engine capacity vehicles.
4th photo: Hydrauic operation type that push and return the release poke by slave cylinder. Provided over 1.5 liters engine cpacity vehicles.
0 / 4000
At least 10~1000 characters.