Size                                   :  Full bore & Regular bore DN50 (2”) ~ DN 1,400 (56”)

Pressure Rating              :  ANSI Class 150 ~2,500, PN 16 ~ 420

Working Temperature  :  -29℃(-20℉) ~ +200℃(392℉)

Service                             :  Oil & Gas, LNG/LPG, Petrochemical, Steel Plant, DH pipeline network

Operator                          :  Lever, Gear (Vertical/Horizontal), Pneumatic, Electrical actuator

Standard Features

l           Split body construction with butt weld end & flanged end

l           Mirror polished stainless steel ball tested spherical roundness

l           Pre-loaded seat springs ensure leak-tight at low pressure and reduce valve operational torque.

l           Anti blow-out stem design according to international standards.

l           Stem dry bearing, metal with PTFE coating and thrust washers having self-lubricating capabilities

l           Floating or Trunnion mounted ball

Option Features (upon request)

l           Self-relieving seats

l           Vertical installation and stem extension

l           Special end-to end(face-to face) and bore size

l           Anti-static device

l           Stem Emergency grease fitting

l           Seats lubricant and emergency sealant fitting

l           Metal-to-metal seat sealing

l           Double block and bleed

l           Double piston effect seats

l           Fire safe design with graphite gaskets

l           Plastic polymer insert for seat sealing

l           Relief valve in the body cavity

l           Electroless Nickel Plating on ball and stem

Material

l      Body      : Carbon Steel ASTM A106-B, A105, A350 LF2, A516-60, A216-WCB or equivalent.

                          Stainless Steel 304 or 316 (*option upon request)

l           Ball        : Stainless Steel 304 or 316 grade

Seat          : Metal seat with inserted polymer seat ring, PTFE, RTFE, Viton, Nylon, Peek etc.