Go to body Contents
Unbranded

METAL JACKET GASKET

  • Payment
    T/T
  • MOQ
    Negotiable
  • Country of sale
    World Wide
  • PRICE
    • FOB

      Depend on quantity

Trade Assurance Service

ITEM SPECIFICS

  • Brand
    Unbranded
    Model .
  • origin
    Republic of Korea
  • Size(Capacity)

Korea Fuji metal-jacketed gaskets are fabricated with Non-Metallic for inner filler as metallic of outer shell.

They are widely used in heat exchangers, Boilers, Pumps, valves with high temperature and
severe corrosion conditions for various plants. (Powers, Chemicals, Oil Refineries, Iron plants)
Metal-jacketed gaskets fabricated by hand in various shapes and sizes as Round, Oval,
and Oblong in order to supply. Besides, many materials used according to temperature,
pressure, and corrosive conditions. (Please refer to page 78/80 for jacket and filler material)
Recently for sealing improvement Graphite and PTFE tape glued together on both sides of gasket in view of increasing consumption.
Effective is especially high in case of damage caused by corrosion on flange
surface.

Single Jacketed Gaskets
Gaskets are jacketed with one thin metal to inner filler.
his sort of gasket is used in Boiler, compressor, Pump, Diesel and Gasoline Engines of low
pressure, however not recommended for standard pipe flange, minimum flange width 6.4mm,
nominal gasket thickness 3.2mm Also available are round jacketed gaskets applicable to Boiler
Man-hone, Steam trap and Sight Glass.

Double Jacketed Gaskets
The filler material is completely enclosed by a two piece metal jacket, which covers both the inside and outside diameters and both contact surfaces KFP 471 is similar to style KFP 470 with the exception that the metal jacket is formed from a corrugated jacket providing better resilience than the KFP 470, since the corrugations form multi-seals across the flange sealing face.

Double Shell Type Jacketed Gaskets
KFP 474 is a double shell type jacketed gasket constructed of two reversed wrap-round shells. This provides superior flange support and handle ability and provides better resistance to high pressures.
Double-jacketed gaskets are used on Boiler and Heat Exchanger applications when ample bolting
is available to correctly seat the gasket. They are designed for high pressure and temperature
applications up to and inclusive of class 900. The temperature limitation of the gasket is dictated
by the combination of metallic and non-metallic materials used in its construction.
Flange widths as narrow as 8mm(5/16 ) could be manufactured, dependent on diameter. Very large
gasket diameters could also be produced. Nominal gasket thickness 3.2mm(1/8 ).
Gaskets could be manufactured with either integral or welded pass partition bars, in a variety of
complex configurations. Some of the most common pass bar configurations are shown on page
34.

Solid Corrugated Metal Gaskets
As the name suggests, the solid corrugated metal gasket is comprised solely of metal and does
not contain any non-metallic fillers in its construction. The temperature limitation of the gasket is
therefore only effected by the metal selected.
The corrugations provide multi-seals across the face of the gasket and inherent resilience.
A minimum of three corrugations is recommended and gasket thickness is approximately 50% of
the corrugation pitch.
Typically used for high temperature applications and applications involving steam, water, gas, oil
etc. up to

Features
- Good sealing performance
- The long life expectancy

Spec
According to the ANSI, ASME, API, DIN, BS, JPI, JIS, KS etc.

PAYMENTS DETAILS

This supplier supports payments for offline orders
  • Telegraphic Transfer : T/T
Contact Payment Manager
  • Name : JONG-TAI LEE
  • Tel : 82-0226771991
  • Email : kfp@kfgp.com

SHIPPING

Shipping from : Republic of Korea
  • #517, Life Arcade, 614-33, Guro-dong, Guro-gu, Seoul 152-050, Korea, 서울특별시,
Can't find a valid Shipping method for supplier account. Please contact the pertaining representative for detailed information.
KOREA FUJI PACKING Co., Ltd.

KOREA FUJI PACKING Co., Ltd.

www.kfgp.com Seller_Mail
  • The person in charge

  • Telephone

    82-0226771991
  • Fax

    02-2677-8334
  • Address

    #517, Life Arcade, 614-33, Guro-dong, Guro-gu, Seoul 152-050, Korea, 서울특별시,
  • Business Type :
    Manufacturer
  • Main Product :
  • Established :
    1985

CUSTOMER QUESTIONS & ANSWERS

0 / 4000

질문이 없습니다.

CUSTOMER REVIEWS (0)

At least 10~1000 characters.

0/ 1000

COMPARISON TO SIMILAR ITEMS more

  • No Items
supplier level
PLATINUMPLATINUM
KOREA FUJI PACKING Co., Ltd. Seller's Store
Seller's Store url
  • Response Level
      41% ~ 50%
  • Supplier Level
      Less than 100 million (KRW)
  • Transaction Level
      less than 5
SUPPLIER BEST
  • GROOVED METAL GASKET
  • SPIRAL WOUND GASKETS