Continuous online monitoring and control for any aqueous solution to accommodate a range of sensors
The conductivity controller (DWA-2000A-CD) Panel mount microprocessor has been built and designed to provide
years of trouble free operation. Designed to operate on all conductivity levels from pure water to sea water.
It is designed to be mounted in a panel and is designed to be connected and calibrated to various levels of conductivity electrodes.
This conductivity controller features fully automatic temperature compensation and accuracy to within 1% of full scale.
When control of conductivity is required, this controller features a high and low volt free output contact,
or 4-20mA output which can be utilised to open dump valves, stop / start reverse osmosis systems.
Probe Cleaning Output
The added feature that this controller has, compared to others in the market is a probe clean relay output,
which can be utilised to control a solenoid for air or water jet cleaning of the electrode surface.
(Especially useful in waste / industrial water plants)
*Microprocessor based Digital Program Controller
*Isolated DC (4-20/0-20/0-24 mA) Output Transmission
*Automatic Cleaning Control Function
*Low-cost For User Satisfaction
*CE Mark Accredited
Model : DWA-2000A-CD
Channel : Single Channel
Range : 0 ~ 2000 ㎲/cm or User Spec
Power : AC 110/240v 50/60Hz
Accuracy : 1 % of Full Scale
Response Time : 30 Seconds (90%)
Analog Output : Isolated 4~20mA DC
Digital Output : None
Relay Output : High / Low / Cleaning
Relay Voltage : Volt free 5A @ 24VDC / 5A @ 240VAC
Display : Measuring Value (7 Segment)
Humidity : Max 90% (Non Condensing)
IP Rating : IP54
Size : 96mm(W) x 96mm(H) x 125(D)
Installation : Panel Mount Only (DIN 96)
0 / 4000
At least 10~1000 characters.