Go to body Contents
Unbranded

MK CLEAR RUBBER PRODUCTS SERISE COLLECTION

  • Payment
    T/T
  • MOQ
    Negotiable
  • Country of sale
    World Wide
  • PRICE
    • FOB

      Depend on quantity

Trade Assurance Service

ITEM SPECIFICS

  • Brand
    Unbranded
    Model Clear Rubber
  • origin
    Republic of Korea
  • Size(Capacity)

Introduction

S .T. R .O .N .G 370-82 SHINPYUNG-DONG SAHA-KU PUSAN KOREA
MYUNG  KWANG  CHEMICAL IND. CO., LTD. 

TEL.82-51-206-7284     FAX.82-51-206-9048
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

 MYUNG KWANG RUBBERS

1. CLEAR RUBBER  for outsole
2. NOVO CLEAR RUBBER  for outsole
3. SUPER LIGHT RUBBER  for outsole
4. MK-2500(ANTI-ABRASION COMPOUND)
5. FLOAT COMPOUND RUBBER
6. SHOCK ABSORBING FOAM

 

Myung Kwang Chemical Co.,Ltd.
370-82, Shinpyung Dong, Saha Ku, Pusan, Korea
Tel. : 82-(0)51-206-7284
Fax.: 82-(0)51-206-9048
E-Mail : service@mkchem.com
 

S .T. R .O .N .G 370-82 SHINPYUNG-DONG SAHA-KU PUSAN KOREA
MYUNG  KWANG  CHEMICAL IND. CO., LTD. 

TEL.82-51-206-7284     FAX.82-51-206-9048
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
CLEAR RUBBER
  
Our "CLEAR Rubber compound" offers excellent physical properties such as transparency, high anti-abrasion, Non-Yellowing, perfect bonding strength with general rubber and upper materials even non-buffing, various color combination, etc.                
 

PHYSICAL PROPERTIES
-.Main Polymer    .............    SYNTHETIC RUBBER
- Appearance      ..........................    Transparent solid sheet
- S.G     .........................................    1.02 ± 0.05
- Moisture ( % )   ...........................    Less than 0.1
- Ash ( % )     ...............................    10   ±   1
- Storage Stability    ...........    12 months
- Stain  .............................................    None
 

CHARACTERISTIC
- Employs to the sole for high transparency.
- Possible to have a press work together with the uncured rubber.
- Good coloring property.
- Good resistance to the heat and sunshine.
- Shall be in custody for a long time.
- Available to be used in press work with no additives.
 

TEST RESULT
( Press Time  :  150℃ × 6 - 7 min )       ORS 045     ORS 049
- Hardness ( shore's A )    .......................   62 - 68      65 - 70
- Tensile Strength ( Kg / cm2 )   ............    85          100
- Elongation ( % )   .................................   400          375
- 300% Modulus ( Kg / cm2 )  ...............    35           60
- Tear Strength ( Kg / cm )   ..................    30           38
- S.G ( g / cc )    .....................................   1.060-1.080   1.070-1.090
- Abrasion Loss ( akron, cc )   ................   0.25          0.18
- N.B.S   .................................................   350           350
 

BONDING METHOD

Toluene Cleaning →  Rubber Primer  → CLEANING  →  PU Adhesive
    OR BUFFING     MK#0070(60℃ 3min)  MEK,EA,ACTN  MK#5010(60℃ 7 min)
 

S .T. R .O .N .G 370-82 SHINPYUNG-DONG SAHA-KU PUSAN KOREA
MYUNG  KWANG  CHEMICAL IND. CO., LTD. 

TEL.82-51-206-7284     FAX.82-51-206-9048
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
STANDARD ROLLING / PRESSING METHOD OF CLEAR RUBBER
1. Stack up sheets of Clear Rubber Compounds by the Lot No, It makes easy to take in and out.
   ( Firs come, first out ).
2.Avoid sunlight, and store in cool and air-ventilating area.
3.Warehouse requires no dusting.
4.Cut Clear Rubber Sheet as it is covered with vinyl paper, and surface of vinyl paper should be located on cutting
  board during cutting work
5.Leftover sheets from cutting work need to be checked carefully whether being stained, and start re-rolling.( Roll                                              temp.: approx. under 60'C ).
6.Just control its thickness only at Rolling Work, long time-rolling may cause deteriorating physical properties.
7.After sheeting, the compound needs to be stacked up as it is covered with vinyl paper by the Lot No.
8.Do cutting and pressing work after Sheet gets cooled down completely.
9.Pressing time should remain 6-7minutes at 150'C.( Pressing time can be changed by the Mold structure(thickness, engraved status, etc.).
 

※    Additionally, when Air does not flow out of Mold easily in press work, uncured parts are going to be turned yellow, the followings are recommended ;
n         Releasing agent(spray) and the high purity releasing agent are requested often spraying time as usual rubber press.
n         While clear rubber gets semi-cured in Mold, Mold needs it be opened shortly within one minute from initial pressing time to take out air.
n         Coated Molds are recommendable.
   (CERAMIC coating or TEFLON coating shall increase Mold-flows and transparency).
n         Partially getting some blade scar on clear rubber(uncured) after cutting by knife is recommendable
 

CAUTION

1. At re-rolling work, the followings should be abided by ;
 - carefully remain Roll temperature to be under 60'C
 - control Sheet thickness only in a short time.
If Rolling runs long time, it may induce mooney viscosity to be down, thus its properties and
curation shall get inferior.
2. Take note of Clear Rubber sheet not to be stained at all.
 
 

S .T .R .O .N . G   370-82 SHINPYUNG-DONG SAHA-KU PUSAN KOREA
MYUNG  KWANG  CHEMICAL IND. CO. ,LTD.

TEL.82-51-206-7284     FAX.82-51-206-9048
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
NOVO CLEAR RUBBER

Our "NOVO CLEAR Rubber compound" offers much better stable physical properties such as tear strength,  traction, tensile strength and heat-resistance than Clear Rubber.
 

It is cured in similar way with regular rubber compound and gives perfect adhesion with regular rubber.
 

In cost saving, it remarkably reduces rejection rate, improves working process easily.
 

It can also be applied to the foxing tape, toe-guard, calender and mold soles in hot-air vulcanizing type shoe manufacturing without bonding problems. 
 

PHYSICAL  PROPERTIES

- Main Polymer    .............    Synthetic rubber
- Appearance      ..........................    Solid sheet
- S.G      .......................................    1.07 ± 0.02
- Moisture ( % )   ..............    Less than 0.1
- Storage Stability  .............    6 months
- Stain  ..............................................    None

PAYMENTS DETAILS

This supplier supports payments for offline orders
  • Telegraphic Transfer : T/T
Contact Payment Manager
  • Name : PARK, YOUNG-AE
  • Tel : 82-0512067284
  • Email : service@mkchem.com

SHIPPING

Shipping from : Republic of Korea
  • #370-82 Shinpyung-dong,Saha-ku,Pusan,KOREA, 부산광역시,
Can't find a valid Shipping method for supplier account. Please contact the pertaining representative for detailed information.
MYUNG KWANG CHEMICAL IND. CO., LTD.

MYUNG KWANG CHEMICAL IND. CO., LTD.

www.mkchem.com Seller_Mail
  • The person in charge

  • Telephone

    82-0512067284
  • Fax

    051-206-9048
  • Address

    #370-82 Shinpyung-dong,Saha-ku,Pusan,KOREA, 부산광역시,
  • Business Type :
    Manufacturer
  • Main Product :
  • Established :
    19810402

CUSTOMER QUESTIONS & ANSWERS

0 / 4000

질문이 없습니다.

CUSTOMER REVIEWS (0)

At least 10~1000 characters.

0/ 1000

COMPARISON TO SIMILAR ITEMS more

  • No Items
supplier level
PLATINUMPLATINUM
MYUNG KWANG CHEMICAL IND. CO., LTD. Seller's Store
Seller's Store url
  • Response Level
      41% ~ 50%
  • Supplier Level
      Less than 100 million (KRW)
  • Transaction Level
      less than 5
SUPPLIER BEST
  • CLEAR RUBBER
  • ACRYLIC ADHESIVES
  • Rubber Accelator,Addtive,Rubber Compounding Chemical Products Detail List.