PHIL-CAST™ is a product used to compress, fix and support a part of your body suffering from fractures and other orthopedic diseases. It serves the purposes of impact prevention, protection on the treated area, pain alleviation and treatments.
PHIL-CAST™ (orthopedic casting tape) is made of glass fiber or polyester fabrics and water hardening resins. If exposed to the air, it is combined with the moisture in the air to start hardening.
Thus, the catalyst for PHIL-CAST™ is 'water'. Three to five minutes after it is soaked in the water, hardening starts. Within 20 minutes, it gets hard enough to support the weight. If the warm water is used, the hardening time can get reduced.
If the cold water is used, it gets longer.
The original fabric for PHIL-CAST™ is made by our own technologies, compared to other products, it provides 30% higher flexibility and elasticity which is easy to use.
PHIL-CAST™ uses the exclusive manufacturing formula of MIKA MEDICAL providing excellent softness. After surgery, great forming can be done.
PHIL-CAST™ can securely fix the exterior and supports good air ventilation that discharges the moisture very fast. it is light weighted and has excellent strength.
PHIL-CAST™ can be used for orthopedic gyps, support gyps, weight supporting gyps and substitutive gyps and so on.
Products features and specs.
PHIL-CAST™ (glass fiber) has the following characteristics.
ⓐ Lighter than polyester products and 20% better strength.
ⓑ Excellent X-ray penetration
ⓒ MIKA fabric with excellent flexibility and elasticity. Good molding and forming ability.
ⓓ Reliability, water proofing and air ventilation.
ⓔ A cast top is used to remove it easily.
PHIL-CAST™ glass fiber product has 20 times as high strength as the existing plaster bandage and supports 20% higher strength than the polyester products.
The weight is only 1/5 of the plaster bandage and thickness is only 1/3.
PHIL-CAST™ glass fiber product has excellent X-ray penetration ability with facilitates a diagnosis of the patient and examination of the recovery condition.
Especially, the high clarity without any residual images allows you to clearly observe the fine fractures as well.
Forming and molding ability
PHIL-CAST™ glass fiber product is a tape developed by the exclusive technology of MIKA and it has excellent flexibility and elasticity (30% higher elasticity than the polyester products)
As a result, it supports excellent forming ability that can facilitate treatments on a curved area of your body such as ankles and elbows.
Reliability, water proofing and air ventilation.
PHIL-CAST™ glass fiber products has excellent strength and it is highly resistant against external impacts. Its edge can be maintained safely from the external impact. In addition, small holes on the fabric can support excellent air ventilation and prevents skin diseases such as itchy, internal moisture, and band odors.
PHIL-CAST™ glass fiber product is used as a cast cutter to cut it more easily than other products, Quick removal can be achieved.
Variety of color.
White, Green, Blue, Pink, Yellow, Orange and others
1) If there is a hole in the aluminum packing, then the moisture in the air can cause it to harden slowly. Do not allow a sharp object to cut the packing or punch a fine hole in the packing pouch.
2) The normal storage temperature is 15℃ ~ 30℃. If exposed to the direct sunlight too long, the storage reliability can deteriorate.
3) If used after long hours of storage in the low temperature, then please wait for one hour in the room temperature before use.
The person in chargeJENNIFER LEE
Address93 Noksansaneopjung-ro, Gangseo-gu, Busan (46752)
0 / 4000
At least 10~1000 characters.