LED Light Source, KLS-050T-RC

ITEM SPECIFICS

Introduction

Long lifetime, Low power consumption!

. Low temperature at input terminal of light guide

. Display function

. Possible is simultaneous control up to 29 units

by communication.

. High resolution (10bit)

. High heat protection circuit

. High power LED applied (Long lamp lifetime)

. Possible is setting of using illuminance(MAX, MIN).

. Over 200% higher illuminance comparing with 150W

halogen light source

Model Name	KLS-050T-RC
Dimension	120mmW x 220mmD x 155mmH
Weight	2.5 kg
Power Consumption	Max. 90W, Normal 50W
Supply Voltage	AC 100~240V ±10％, 50/60Hz
Input Power Protection	by Fuse 250V/2A [Ø5 x 20mm]
Operating Circumstance	0 ℃ ~ 40 ℃, 10 ％ ~ 80 ％
Storage Circumstance	−20 ℃ ~ 60 ℃, 5 ％ ~ 90 ％
Illumination Control Range	1~999 step (10 bit Resolution)
Illumination Control Method	Manual : by Key
	Remote : by 8 bit Digital (256 Level),
	by Serial Communication (RS-232C/RS485)
ON/OFF control	by KEY
ON/OFF control	by RS-232C/RS485 Command
Brightness	over 600,000 Lux (White Color)
Ferrule/Fit Fiber Diameter	15mm (Inner) / 12~13mm
Ferrule/Fit Fiber Diameter	18mm (Inner) / 15~16mm
Error Detection	FAN & LED failure, Temperature
Cooling Method	FAN Forced Air Cooling
Luminous Color	White
Color Temperature	6,500˚K ± 500˚K
Lamp Lifetime	30,000Hr
* Brightness(illumination) is measured 50mm apart from the end of glass fiber,
when 10mm diameter and 1,000mm length glass fiber guide is connected.
* Lamp Lifetime : Time taking to decrease to 70 percent of initial illuminance
at normal temperature