Go to body Contents

Dental Filling Materials_ ENDOCEM MTA

  • Payment
  • MOQ
  • Country of sale
    World Wide
    • FOB

      Depend on quantity


  • Brand
  • origin
    Republic of Korea
  • Size(Capacity)

Dental Filling Materials_ ENDOCEM MTA


ENDOCEM MTA is a revolutionary next generation MTA product based on the science of pozzolan reactions; 
featuring quick setting times, easy handling with consistent outcomes; excellent sealing capabilities; and outstanding biocompatibility. ENDOCEM MTA exhibits high efficacy not only in apical retro-filling and root perforations, 
but also in vital pulp therapies such as direct pulp capping.
Mixing ratio(P/L) = 300mg/0.12cc
Fast setting time · Adequate consistency
ENDOCEM MTA is non-miscible with liquid components, including blood, and thus is ideal for use in clinical situations where bleeding is difficult to control.
It has a fast setting time that allows for resin bonding to occur immediately after setting.
When used while pulpal bleeding occurs, a thin layer is applied first, and bleeding is controlled with cotton pellet. The remaining ENDOCEM MTA may then be applied.
Setting may be confirmed by spraying water vigorously with an air/water syringe. Incomplete setting is identified when water spray washes away part of the material placed.
If this is found to be the case the restoration should be removed in its entirety with the process started anew.
Mechanical property
ENDOCEM MTA maintains its integrity in less than ideal clinical situations, including contamination with blood or saliva and presence of inflammation or infection.
It is compatible with any type of bonding agents.
endocem_mta   endocem_mta  
Dentin bonding strength (push-out bond strength)
by MTA types
  Shear bond strength
between MTA and various resin bonding agents.
Anterior teeth were vertically sectioned along the long axis, and 2 mm thick dentin slices made. A perforation 1.5 mm in depth was drilled in the root canal, and filled with MTA (mixed in accordance with manufacturer’s guidelines). Wet cotton was placed on top, and left for 1, 3, and 7 days. Push-out bond strength of MTA against dentin was measured with 1 mm/min crosshead speed. (n=10)
Please see test results above.
  A perforation 4 mm in diameter and 2 mm deep was drilled in a cylindrical block, and filled with MTA (mixed in accordance with manufacturer’s guidelines). It was left to harden for 1 week under conditions of 98oF at 100% humidity. At this point flowable resins representing 4th, 5th, 6th and 7th generations were bonded to the block and shear bond strength measured. (n=10)
Please see test results above.
ENDOCEM MTA is seen as reaching a lower level of strength than ProRoot MTA initially. However, the bond strength increases over time.
Unlike conventional MTAs that exhibit bonding strength changes dependent on external factors such as saliva, blood, or inflammation, ENDOCEM MTA exhibits a consistent level of bond strength regardless of external factors.
  ENDOCEM MTA exhibits consistent shear bond strength across all bonding agent types. This is further proof that ENDOCEM MTA is compatible with all bonding agents, and not adversely affected by specific characteristics of certain bonding agents.  
Super sealing property
This is an example of stable clinical outcomes in presence of severe inflammation with minimization of dead space resulting from pozzolan reaction.
endocem_mta After MTA was mixed in accordance with manufacturer’s guidelines, it was applied in a 5 mm X 2 mm Teflon tube, and then immediately immersed in FBS. After 24 hours it was taken out, washed, and observed under SEM.
(a) ENDOCEM MTA, (b) ProRoot MTA, (c) IRM
When (b) Proroot MTA is used for the same protocol the FBS infiltrated part was found to have been washed away during the setting process. When (c) IRM is used for the same protocol resistance to wash-out is comparable to that of (a) ENDOCEM MTA. However, many adjacent gaps are observed, and this is indicative of weaknesses where liquids, including water or blood, could possibly invade.
When exposed to liquids, i.e. saliva or GCF, the seal may be compromised over time due to degradation. Therefore, adding a resin base will be necessary before final restoration in direct pulp capping.
Least discoloration
ENDOCEM MTA allows teeth to maintain natural esthetics as it does not cause discoloration.
endocem_mta endocem_mta
Picture view after tooth was filled with MTA and restored in artificial saliva.
(a) ENDOCEM MTA, (b) ProRoot MTA, (c) Angelus MTA
Unlike (b) Proroot MTA or (c) Angelus MTA, (a) ENDOCEM MTA does not cause discoloration of adjacent tooth.
This is possible through the pozzolan reaction’s blockage of dentinal tubules. However, it should be noted that if leakage occurs in the final restoration, ENDOCEM MTA itself could undergo corrosion and that process may lead to discoloration.
Antibacterial effect
ENDOCEM MTA has antimicrobial effects, not only on S. Mutans but also on E. Faecalis.
Enterococcus Faecalis is a pathogenic bacterium found with highest frequency in roots of endodontic failures, and is resistant against most MTA. 
ENDOCEM MTA possesses strong anti-bacterial properties against E.Faecalis.
Excellent biocompatibility
Our patented manufacturing techniques guarantee ENDOCEM MTA’s excellent biocompatibility.
SEM observation (x1000) of MG63 cells incubated for 72 hrs on (a) ENDOCEM MTA, (b) ProRoot MTA, (c) IRM
In (a) ENDOCEM MTA and (b) ProRoot MTA, cells grow well and many cytoplasmic extensions are found, indications that these two materials have excellent biocompatibility. However, cells on (c) IRM image are all round in shape, indicating cell death.
Case Report :
Apicoectomy #1
Surgical method was selected over prosthetic approach due to post positioning.
A distinct linear alba may be observed after surgery using ENDOCEM MTA.
Case Report :
Apicoectomy #2
Due to the length of the post, surgical approach was best in this case.
The restoration was poorly placed resulting in the tooth experiencing excessive occlusal interference. 
Nevertheless, the tooth is seen in the process of healing after surgery and placement of ENDOCEM MTA.
Case Report :
Extraction was necessary due to extensive root contamination and apical lesion. 
Retro-filling was completed using ENDOCEM MTA and replantation was performed. 
11 months post-operatively, good healing with development of new hard tissues found on radiograph.
Case Report :
Perforation Repair
ENDOCEM MTA particles are smaller in size on average than conventional MTA products, and it also has a high viscosity. 
Therefore, it is easily applied using an appliance such as the CENTRIX gun. 
Another important feature is ENDOCEM MTA’s non-miscibility that allows it to maintain integrity in less than ideal clinic conditions such as uncontrolled bleeding, without fear of wash-out. 
The unique characteristics of ENDOCEM MTA facilitate its use in areas that may be difficult to isolate and maintain a dry field.
Strip perforations may be successfully restored with ENDOCEM MTA. Please see above.
Case Report :
Case of pulpal inflammation due to Dens Evaginatus and fracture.
After canal irrigation was performed up to the necrotized area, the canal was filled with ENDOCEM MTA by retro-filling method.
After case completion the treated area looks almost indistinguishable from natural root.
Case Report :
Vital pulp therapy #1
Many studies have found that success rates of direct pulp capping is significantly affected 
by the cause of pulp exposure, scope of pulp exposure, and patient’s age. 
However, ENDOCEM MTA boosts rates of successful outcomes to the point that
it exceeds that of the conventional endodontic treatment regardless of aforementioned factors in direct pulp capping.
Case Report :
Vital pulp therapy #2
When pulp exposures occur in anterior teeth, Partial pulpotomy with MTA is likely the best treatment option. When doing so, EMDOCEM MTA, impervious to contamination by blood, is the safest product choice for successful clinical outcomes.
Case Report :
Vital pulp therapy #3
Direct pulp capping and resin core build up on maxillary 1st molar ENDOCEM MTA makes immediate resin bonding and preparation possible after treatment due to its fast setting time.
Case Report :
Pulpotomy of deciduous tooth
ENDOCEM MTA may be used in primary teeth without total bleeding control, with placement of stainless steel crown immediately after treatment.
ENDOCEM is biocompatible; and thus, causes low level of irritation resulting in less calcification. 
However, clinical findings from pulpotomy treatments show that ENDOCEM MTA also induces calcification in root canals



This supplier supports payments for offline orders
  • Telegraphic Transfer : T/T
Contact Payment Manager
  • Name : Sung Wook, Jang
  • Tel : 82-0337340330
  • Email : help@endocem.com


Shipping from : Republic of Korea
  • 1720-26 Medical Industry Comlex Building. No. 2-208, Taejang-dong, Wonju-si, Gangwon-do, South Korea, 강원도,
Can't find a valid Shipping method for supplier account. Please contact the pertaining representative for detailed information.


  • The person in charge

  • Telephone

  • Fax

  • Address

    1720-26 Medical Industry Comlex Building. No. 2-208, Taejang-dong, Wonju-si, Gangwon-do, South Korea, 강원도,
  • Business Type :
  • Main Product :
  • Established :


0 / 4000

질문이 없습니다.


At least 10~1000 characters.

0/ 1000


  • No Items
maruchi Seller's Store
  • Response Level
      41% ~ 50%
  • Supplier Level
      Less than 100 million (KRW)
  • Transaction Level
      less than 5
  • Dental Filling Materials_ Endoseal
  • Dental filing materials OEM
  • Dental Filling Materials_ endocem Zr

Gobiz Korea 온라인수출통합플랫폼

Gobiz Korea, as the operator of mediation service or mail order broker, shall not be held responsible for the sell order.
The responsibility for order, delivery and refund of products belongs to seller.