* RO Filtration System *

▶HW-NP100 : Sediment Filter + Pre Carbon Filter RO Membrane Filter + Post Carbon Filter

▶HW-NP100M : Sediment Filter + Pre Carbon Filter RO Membrane Filter + Post Carbon Filter + RO Pump

1. Features of HW-NP 100 Series

◎Undersink type

◎Use of RO membrane Filter

- Average Flow Rate(GPD): 50,75,100,150 GPD

- Improving the TDS(Total Dissolved Solids) rejection

- Meets all different water quality needs.

◎With booster pump (HW-NP 100M)

- Using the high quality booster pump that can provide 100-120psi water pressure to pass through

the membrane even with areas under low water pressure.

◎Specification

- Dimension : 325*180*430mm(W*D*H)

- Weight : 7.5kgs (HW-NP 100), 9.5kgs (HW-NP 100M)

2. Recommended Operating Regulation of RO

1) Need enough flushing after installation and changing filters.

2) It takes 1week to get the correct value of TDS (after stabilizing RO membrane)

3) Rate of removal and the volume of treated water depends on water temperature, water pressure,

condition of raw water and etc.

 4) Product Specifications for RO Membrane.

Permeate flow and slat rejection are based on the following test conditions.

: 250ppm(NaCI) softened tap water, 77˚F(25˚C), 15% recovery and the specified applied pressure

* Optional Filter System (UF membrane / Alkali / Nano pH)

▶HW-NP(OP)200 A : Sediment Filter + Pre Carbon Filter + UF Membrane Filter + Alkali Filter +  Post Carbon Filter

▶HW-NP(OP)200 N : Sediment Filter + Pre Carbon Filter + Nano pH Filter + Post Carbon Filter

▶HW-NP(OP)200 U : Sediment Filter + Pre Carbon Filter + UF Membrane Filter + Post Carbon Filter

1. Features of HW-NP(OP) 200 Series

◎Undersink type & Onsink type(Counter top)

◎Saving space

◎Optional Filter System(UF membrane / Alkali / Nano pH)

* UF membrane Filter – Removal for harmful chemicals, bacteria, virus, Etc.

                     But, containing the minerals beneficial for health

* Alkali Filter – Removal Active Oxygen(pH5.8~pH8.2)

* Nano Ph Filter – Strong of oxidation, reduction potential reducing rate Removal Active Oxygen(Ph8~Ph10)

◎Specification

- Dimension : 325*180*430mm(W*D*H)

- Weight : 7.5kgs

* Tankless RO System *

▶HW-NP(OP)300 M : Sediment Filter + Pre Carbon Filter + RO Membrane Filter + Post Carbon Filter + RO Pump

1. Features of HW-NP 300 Series

◎Tankless Reverse Osmosis System 

◎Undersink type & Onsink type(Counter top)

◎Use of RO 300 GPD Filter

- Average Flow Rate(GPD): 300 GPD

- Improving the TDS(Total Dissolved Solids) rejection(Rejection Rate: 97%)

- Meet all different water quality needs.

◎With booster pump(Motor)

- Using the high quality booster pump that can provide 100-120psi water pressure to pass through the membrane even with areas under low water pressure.

◎Basic permeate rate

- Inlet water oressure : 3kgf/㎠

- Flow rate : 120LPH / Capacity of treated water : 300 GPD

◎Specification

- Dimension : 325*180*430mm(W*D*H)

- Weight : 10.5kgs

2. Specification of parts

◎RO 300GPD

- Operation pressure(psi): 65psi

- Average Flow Rate(GPD): 300 GPD

- Rejection Rate(%): 97%

- Recover Rate(%): 10%

◎HIGH quality PUMP

- VOLTS : DC24V     - INLET PRESSURE : 15~90psi      - OPEN FLOW : 2.1LPM

- AMPS : 2.1A        - WORKING PRESSURE : 82±8psi   - SUCTION HEIGHT : 2M