Description
Oxygen supply level is regulared by Knob, rotation of wich starts with "click" sound, that
diffrers from other simiar products. It is done to avoid the overflow of the oxygen to the
patient.

Feature
● Humidification Method : Gas Powered Type
● Medical oxygen with purity of 99.5% or higher
● Standard Pressure : 393 kPa (4.0±0.5 kgf/㎠)
● Use Pressure : 345 kPa (3.5 kgf/㎠)
● Maximum Supply Flow rate : within 60 N LPM
● Humidifier (At 37°C): 25% ad Min. 10mg/L
● Patient Tubing: 3/16" to 5/16" I.D. Tubing
● Safety Valve: The operation at 58.6 kPa
 

1. We improved patient nipple part. Copper with chrome-plated (Other products is easy to broken and damaged this part).

2. Make a simplify the structure:  we make a change this part. So easy to remove and clean
(Other products not easy to remove this part. So easy to disinfection bacteria occur).

3. New straight mold design is improved grip feeling.  (Korea institute of design promotion: Good design selection No. 14CA010016)

4. Other product of safety valve is exposed. But it can be easy to touch by patient. Sometimes make a mistake and cause problems. New Oxyvac safety valve is designed only use special screw key. So it can be prevent adjust by patient. Patent No. 1014405810000)

5. Our Flowmeter is developed the flow rate did not change from the pressure change.
Other product adopt screw type. But it is happen screw gap. Due to the gap of the screw the flow rate pressure variation occur.

6. Dual taper adopted: we use wide range scale of frequent use section.
It can be possible adjust fine tuning.

7. We will develop Polysulfone material Flowmeter with humidifier until end of this year.
Characteristics of Polycarbonate(PC) is week from the chemical cleaning.
When the chemical cleaning, the Polycarbonate will crack or gradually clouding discoloration.

8. Continuous product development:
We are constantly listening to the needs and complaints of customers.
We develop constantly to upgrade the product without delay.