Go to body Contents
Unbranded

OK SMPS 200W

  • Payment
    T/T
  • MOQ
    Negotiable
  • Country of sale
    World Wide
  • PRICE
    • FOB

      Depend on quantity

ITEM SPECIFICS

  • Brand
    Unbranded
    Model OK SMPS-KPF-SERIES 200W-12V
  • origin
    Republic of Korea
  • Size(Capacity)

Electricical Specification

SMPS KPF-Series
Model
KPF-Series 200W-12V
AC Input Current Voltage : 200Vac~240Vac(47~63Hz)
Ac Input Current
1.0A/220VAC
Output
12V/16.6A
Protective Function : over-voltage, over current, overload, short circuit, over-temperature
Insulation voltage : IN-OUT : 3KVAac, IN-FG : 1.5KVac, OUT-FG : 500Vac
Operational Temperature -20~50°C at 75%, 60°C at 60% Load
PFC
97%
EFF
88%
Weight
1.25kg
Dimension
237(W) x 70(L) x 44mm(H)
1BOX
10PCS




General Specification

  • Electrical Safety Approval : KC, EMC, EMS
  • LED Lighting Device
  • Waterproof Protective Grade : IP68
  • Protective Function - Short Circuit, Overload, Over-Voltage, Over-Temperature
  • External control(of voltage, current) enabled to suit the characteristics of LED
  • Utility Patent and Circuit Patent Pending
  • AC Input, Over-Voltage Protection (Over 270Vac: Power shut off / Under 260Vac Auto-Recovery)



PFC Introduction

PFC is the initial of Power Factor Correction that means a correction in the power-efficiency. To be simple, electric power saving circuitry is added to power supply to raise the power-efficiency. For example, it controls the electric power going into components such like ballast stabilizer or light transformer which is occurred momentary leaking of power.
PFC adjusts the voltage going into component part by itself to supply stabilized electric power to the other parts.



Advantage of PFC

  1. Supply more stabilized current to each of components
  2. Reduction the waste of electric power consumption
  3. Prevent a rise in temperature caused by the heat converted from the unnecessary current
  4. Lower the level of noise caused by the reduced fan speed
  5. Reduction electromagnetic waves



Caution

 

This product is LED convertor for only LED lamp.

  1. SMPS should ideally be operated within 70% of it's normal capacity.
  2. Install in a well ventilated area away from direct sun light. Over temperature protection)
  3. If two or more units are to be installed, keep a distance of at least 30cm between the units to be installed.
  4. The earth wire must be connected to the ground. (Otherwise, It's not guaranteed.)
  5. Please check input voltage and follow connection diagram before use.
  6. Damages caused by natural disaster including lightening and surge are not covered under the warranty.

PAYMENTS DETAILS

This supplier supports payments for offline orders
  • Telegraphic Transfer : T/T
Contact Payment Manager
  • Name : CHO JIN HEE
  • Tel : 82-0326770000
  • Email : okled@okinc.co.kr

SHIPPING

Shipping from : Republic of Korea
  • , 경기도,
Can't find a valid Shipping method for supplier account. Please contact the pertaining representative for detailed information.
OK INDUSTRY INC.

OK INDUSTRY INC.

okinc.co.kr Seller_Mail
  • The person in charge

  • Telephone

    82-0326770000
  • Fax

    +82-32-677-1111
  • Address

    , 경기도,
  • Business Type :
    Manufacturer
  • Main Product :
  • Established :
    2008-03-24

CUSTOMER QUESTIONS & ANSWERS

0 / 4000

질문이 없습니다.

CUSTOMER REVIEWS (0)

At least 10~1000 characters.

0/ 1000

COMPARISON TO SIMILAR ITEMS more

  • No Items
supplier level
MEMBER
OK INDUSTRY INC. Seller's Store
Seller's Store url
  • Response Level
      41% ~ 50%
  • Supplier Level
      Less than 100 million (KRW)
  • Transaction Level
      less than 5
SUPPLIER BEST
  • OK SMPS 300W
  • OK LED MODULE- DC WHITE SERIES
  • OK LED-INSERT LENS TYPE