AC Servo Motor Trainer

• AC Servo Motor Trainer enable students to do an experiment for position control, speed control and C.N.C application operation. It is the same as an equipment which is used in industry field.
• Since processed products of 3 types are installed in upper portion, AC servo motor trainer can be worked such as a real processing when this trainer is operated. Moving distance of the X-axis is over than 350mm and Y-axis is over than 10 mm.
• In Y-axis, drill and milling working can be processed by drill chuck which is able to process product using cylinder motor.

Experimental List

• Teaching Pendant usage
• Servo ON/OFF
• Return to the starting point of servo motor
• Manual operating of servo motor
• Change operating the jog speed of servo motor
• Program method of servo motor
• Operating by program 1
• Operating by program 2
• Continuous operating of servo motor
• Servo control by external input
• External output control 1 by program
• External output control 2 by program
• External output control 3 by program
• External control to servo motor operating
• Change the operating program by external input

Specification

• Power : 1Ø AC
• Servo Motor
  ..Power : 100W
  ..Rated speed 5,000 [RPM]
• Servo Driver : PWM control using IPM
  ..Encoder : 2048,6000,2500 P/R
  ..Com. port : RS-232C 1ch
• Controller
  ..User input toggle switch : 8EA
  ..System input toggle switch : 8EA(TG/PB/EM)
  ..User input terminal : 8EA
  ..System input terminal : 8EA
  ..User output lamp(buzzer) : 8EA
  ..System output lamp : 4EA
  ..User output terminal : 9EA
  ..System output terminal : 4EA
• Cylinder Motor
  ..Power : DC
  ..Composition : Up/Down Motor 1EA, Drill Motor 1 EA
  ..Running method : 1 Step Cycle
  ..Moving distance : Y-axis, 0 ~ 10mm
• Position Decision Device
  ..Frame : X-axis, LM Guide Type
  ..Power Transfer : Ball Screw Type
  ..Limit Sensor : Left, Right Limit
  ..Ball Screw(Photo Interrupt)
• Dimension : 675(W) x 390(D) x 445(H)mm