Introduction
No foot valve is needed due to the excellent self-priming ability (max. 9 m).
As a flexible impeller is used, it is ideally suitable for pumping sludge and waste water-containing sludge.
Using a reduction gear motor, high-viscous fluids can be transferred.


Features
It is simple to install/operate as air venting and water filling are not required.
It is easy to replace parts. When taking off the front cover, the rubber impeller in the casing can be easily replaced


Specification
Mono Flex (Flexible Impeller Pump)

 Max. Capacity: 60m3/h (Sanitary), 180m3/h (Industrial)
 Max. Pressure: 7bar
 Max. Viscosity: 1,000,000 cPs
 Casing Construction: Stainless Steel, Cast Iron, etc.
 Impeller Materials: Rubber


Dimensions 

A: 150mm,    B: 55mm,    C: 120mm,    D: 123mm,    
E: 39.5mm,    F: 38mm,    G: 142mm,    H: 132mm,   I: 12x8,
J: 7.5mm,     K: 142mm,   L: 454mm,    M: 74.5mm,    N: 162mm,   
Inlet & Outlet Dia.: 3S, Diameter for 4 Holes of Base: 11mm


Applications
Dairy, Beverages, Jam, Paste, etc.