• WJ-400 is a dry solvent stop-off lacquer or liquid maskant that can be applied over a clean surface by brushing, dipping or spray to the surface to be masked.
• WJ-400 can be used in most plating cycles. For certain process requirements additional coats may be applied after solvent flash off. Under normal ambient conditions parts can enter the plating cycle within one hour after application.
• WJ-400 with a viscosity of 8,500-9,500 cps can be applied to a very sharp line.
• PEELSEAL contains additives to maintain dimensional stability which require suspension prior to application. Use care in stirring to avoid introduction of air bubbles.
Anodizing maskant, Selective anodizing maskant, Partial plating
• Type : liquid
• Size : 4L / Drum
• Caution : flammable
Feel free to inquire about products that are suitable for your use.