●  The inside-slope rotary revolver prevents the lens from being 
    blurred by breath. The product uses high-intensity semi-permanent 
    white LED to present a clear image. The 30-degree slope of 
    the tube provides convenience to the observer.  

●  The double-eye ocular allows clear observation of 
   the sample and simple adjustment of the eye-gap. 
   The product also supports a diopter.

 

HOW TO USE
① Place the sample to be observed on the stage and fix it. 
② After connecting power to the illuminant device, turn on the light and adjust to an appropriate intensity.
③ Place the eye on the ocular and move the focus handle up and down to focus the sample clearly. 
④ In case of general stages, move the stages with the hand to set the location of the sample’s image. 
    In case of mechanical stages, move the double-x-layer to the front, back, left and right.
⑤ When observing, turn the object lens clockwise from low magnification to high magnification.
⑥ Using the eye-gap adjuster or diopter, precisely focus the image to fit the user.

 

During observation under high magnification [Object X100]
When observing with 100x oil lens, apply a single drop of emulsion oil on the preparation (sample), 
and observe while properly adjusting the precision handle. 
When observation is complete, wipe off the emulsion oil on the tip of the object lens. 
Do not touch with the hand, and wipe off carefully using a clean sheet of cloth. 
To maximize the effect, use the aperture or light-amount adjustment switch to adjust the amount of light.