High pressure and high flow rate
In comparision to our exisiting lines, both the pressure and flow of these valves
are much increased. (Max. operating pressure 35MPa, Max. flow rate 100L/min)
Low pressure drop and Stable operation
The pressure drop of these valves are reduced by 10% from 1.0 to 0.9MPa in
comparision to our exisiting lines. Due to the powerful magnetic and spring force of the
solenoids, these valves exhibit a high tolerance to
contaminants and especially stable operation.
50-60Hz common service solenoids do not require rewiring when the
applied frequency is changed. (AC110V, AC220V)
The spark between the relay contacts has been eliminated and therefore
the valve can be operated by miniature relays.
The surge voltage is approximately 10% of than normally experienced. (DC12V, DC24V)