SAMYUNG KALOS LOW ARM LH/RH
A control arm is a bar with a pivot at each end, and it is used to attach the suspension member to the chassis.
When coil springs are used in both front and rear suspension, three or four control arms are placed between the rear axle housing and the frame to carry driving and brake torque.
The lower control arms pivot on the frame members and sometimes support the rear coil springs to provide for up-and-down movement of the axle and wheel assembly.
A-arms are control arms with two inboard pivots, giving strength.
Some front end designs use control arms instead of A-arms.
This is usually done to save weight and add adjustability.
||KALOS LOW ARM LH/RH
||375 x 315 x 140
|Material for bushing
|Control Arm Type
|Ball Joint Attach Type
Includ Ball Joint
|OE Number Info
Aveo 2003~2004 Outer Left/Right Lower
Kalos 2002~2004 Outer Left/Right Lower
||Republic of Korea
SAMYUNG is the manufacturer of steering and suspension auto parts in KOREA
SAMYUNG was established in 1972
We are supplying(supplied) OEM products to HYUNDAI, KIA, RENAULT SAMSUNG, SSANGYONG, GM, CHEVROLET, BUICK, OPEL, NISSAN, DELPHI, ZF, TRW, MANDO, Etc.
Also exporting the aftermarket products to the WORLD.