If you want bulk purchase, please contact us.
Depend on quantity
|Since its foundation in 1990, Conotec Co., Ltd. has accumulated new technological capabilities through the development of state-of-the-art hardware and software program with a view to meeting the challenges of the new era of technology, information and globalization. Conotec Co., Ltd. is a maker of quality product ranging from a digital temperature controller to a digital temperature indicator, digital humidity controller and digital timer. Compared to other common analog controllers, the compact-sized digital controller offers expanded functionality greater performance stability and an excellent value for the price.
- Material : stainless
- Wall Mounting Type
Indicator External Size : 269 x 165 x 33 mm (10.59 x 6.49 x 1.29 inch)
Operating Range : -55.0 ~ 99.9°C
Input Sensor : NTC (10KΩ) (wire length : 5M)
Style of Instruction : 7 segment LED Display 2.3" (48 x 70mm / 1.88 x 2.75 inch)
Display Accuracy : ±1% rdg ±1dig
Power Supply : 12V AC/DC ±10%
Applicable Area : Bathroom, Sauna (Wall Mounting)
Ambient Temperature/Humidity : 0~70°C (32~158°F), 35~100%RH
Weight / 1pc : 2Kg
Caution fot your safety
Pls use this item after installing the duplex safety device in which is applied at dangerous factors such as serious human injury or serious damages of property & important machine because this item is not designed as safety device
Safety instruction and hazard warnings
• Please read the operating manual through completely before putting the device into operation.
• We will not assume any responsibility for damage to assets or persons caused by improper handling or failure to observe
the safety instructions or hazard warnings.
• For safety and licensing reasons, unauthorized conversion and/or modification of the device is not permitted.
• Do not exceed the maximum permissible current - in case of higher loads, use a contactor of adequate power.
Make sure that the supplied voltage matches the values specified for the instrument.
• The device must be adequately protected from water and dust as per the application and must be accessible via the use of
• The device must not be exposed to extreme temperature, sunlight, strong vibrations or high levels of humidity.
• Operation or installation is not permitted under unfavorable ambient conditions such as wetness or excessive induction loads
or solenoid and dust, combustible gases, vapors or solvents, especially high-frequency noise
• Avoid operation or installation close to high-frequency fields such as welding devices, sewing machines, wireless transmitter,
radio systems, SCR controller, etc
• Do not install the sensor cable nearby signal cable, power cable, load cable
• Please use the shield cable when the sensor cable’s lengthen, however do not make it too much longer
• Please use the sensor cable without any cutting or flaw, blemish.
• The device is not a toy and should be kept away from children
• Installation work must only be carried out by suitably qualified personnel who are familiar with the hazards involved and with
the relevant regulations.
• You shouldn't tinker with anything or the product may not be opened or disassembled unless you know what you're doing.
Please ask us about this questioning
The person in chargeSeongbaek park
Address26, Yunsan-ro, Geumjeong-gu, Busan, Korea (46269)
0 / 4000
At least 10~1000 characters.