ABS has excellent impact strength, moldability and paintability, and is regarded as a very practical material thanks to its wide applications in various fields. In general, ABS has modulus and heat resistance, and YJM offers a variety of ABS lineups depending on required features such as general purpose, extrusion, flame retardant, heat resistance, and plating/painting.
*PC/ABS is a polymer manufactured by mixing PC and ABS, PC/ABS has excellent extrusion and injection processability, as well as chemical resistance.
It has excellent flame retardant properties and can be used for electrical and electronic products, OA housings and automotive interior and exterior materials.
- Drying temperature 90-100℃, Drying time 4hr, Maximum moisture content 0.02%
- Melt temperature 280-300℃, Nozzle temp. 270-290℃, Barrel Temp 260-300℃, Hopper Temp 60-80℃,
• Electronics, Household appliances, Miscellaneous goods, Electronic housing. Etc
•Rohs (Br, 300ppm, Cl 300 ppm, Cd 50ppm, Hg 300, Pb 200ppm below), Non-brominated, Non-chlorinated retardant,
•Sprues and runners can be reground with virgin resin within the ratio of 20%.
Care must be taken to ensure that the regrind is free from impurities and regrind should not be used in applications where impact performance and/or agency compliance are required.
|Technical Data Sheet
|Melt Flow Index
||Izod Impact Strength
||㎏f . ㎝ / ㎠
||Heat Deflection Temp.
Notes) These are Just typical properties, not specifications, Users should confirm results by their own test