Product name : Compression Tube Fitting
Type : Male Connector
P-No. : HMC4-4N, HMC4-6N, HMC4-8N, HMC5-6N, HMC6-6N, HMC6-8N, HMC8-6N, HMC8-8N, HMC10-12N, HMC14-12N, HMC16-16N
Material : stainless steel 316/316L
Tube OD : 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8, 1 inch
Thread Type : 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8, 1 inch NPT

The compression fitting has the characteristics of reliable connection, strong pressuer resistance,
convenient installaton and maintenance, and safe and reliable work.
The seamless steel tube that the cut surface should be smooth
Put the nut and ferrule on the steel pipe in sequence, paying attenton to the direction.
Apply lubricating oil on ON the connector body and the ferrule, insert the steelpipe into the joint body to the end,
and start to tightern the nut by hand
The male connector  to tubing on one end and has an NPT male thread connector on the other.
One side is a double ferral structure, which leads to FRONT FERRULE and BACK FERRULE.
FRONT FERRULE contacts the fitting body and performs the role of primary seal at the tubing outer diameter.
BACK FERRULE is designed to tighten the tubing by pushing the FRONT FERRULE in a axial direction and hinged inward.
Connect to one tubing and male screw
PT MALE CONNECTOR in Double Ferral Design
dimension, and metal and mechanical uniformity excellent and separation and recombination facilitate after the toothed tooth tightening
Produced by STAINLESS STEEL 316
: Water, oil, air and some corrosive liquid.

Website : https://www.hj-gk.com