Product name : Compression Tube Fitting
Type : UNION ELBOW
P-No. : HUL-4, HUL-5, HUL-6, HUL-8, HUL-10, HUL-12, HUL-14, HUL-16
Material : stainless steel 316/316L
Tube OD : 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8, 1 inch both sides

The compression fitting has the characteristics of reliable connection, strong pressuer resistance,
convenient installaton and maintenance, and safe and reliable work.
The seamless steel tube that the cut surface should be smooth
Put the nut and ferrule on the steel pipe in sequence, paying attenton to the direction.
Apply lubricating oil on ON the connector body and the ferrule, insert the steelpipe into the joint body to the end,
and start to tightern the nut by hand
The UNION ELBOW is structured to connect to both ends by tube.
One side is a double ferral structure, which leads to FRONT FERRULE and BACK FERRULE.
FRONT FERRULE contacts the fitting body and performs the role of primary seal at the tubing outer diameter.
BACK FERRULE is designed to tighten the tubing by pushing the FRONT FERRULE in a axial direction and hinged inward.
Connect to both side ends tubing.
UNION in Double Ferral Design
dimension, and metal and mechanical uniformity excellent and separation and recombination facilitate after the toothed tooth tightening
Produced by STAINLESS STEEL
: Water, oil, air and some corrosive liquid.
Website : https://www.hj-gk.com