HyFinder: Hydrogen Leak Detection Paste
Easy to apply Hydrogen Sensing Paste that allows to detect hydrogen leaks with bare eyes.
How to use:
1.Clean the surface to be coated. The surface should be dry, dust-free, and grease-free. (*Recommended to use thinner or alcohol as a solvent.)
2.Coat the surface so the paste is at least 1mm thick. Leave the coated surface to dry at room temperature for over 20 mins.
3.Re-coat the surface every 3 months to get the best result. (*If a leak is detected, the leak point should be repaired and re-coated.)
4.Use as soon as possible after opening date.
1.Keep out of reach of children.
2.Avoid contact with eyes and skin. If such contact occurs wash away with clean water and consult with a doctor.
3.Store in a cool place away from direct sunlight.
4.Use within -55℃~150℃ temperature interval. Seal tightly after use.
5.Be careful when opening the lid. Sharp edges may cause injury.
6.Do not use once paste color has changed.
7.Do not mix with other products. Do not combine with previously used products.
8.Use within 3 months from manufacturing date.
Applications: valve, flange, fitting, connector, coupling, parts under vibration, welded pipe.