Product Features

1. Stylish color and design to match the external environment
Luxurious colors of silver, gold, and black
can be selected to match the external environment

2. The world's only optimal irradiation angle
To increase the sterilization power, various researches
are conducted to select the optimal irradiation angle
The world's only product design structure that sterilizes close to the button

3. Publicity effect
Providing the advantages of sales promotion
by securing the promotion effect and facility stability to attract customers

4. Reasonable product
Products that add sterilization function to existing elevators
Expensive elevator equipped with sterilization function, no replacement required

5. Free resizing
Depending on the size of the internal/external control panel,
the upper/lower/left/right length can be cut and installed

6. Excellent accessibility
Improving the difficulty of reading Braille for the visually impaired,
which is a problem when applying the existing antibacterial film

7. Excellent sterilization power
Completion of self-sterilization power test and certified laboratory test

8. Stability
In-house UV safety test and certified laboratory test completed

Main Structure

1. Main aluminum x-frame body
2. PIR motion sensor
3. motion display
4. UV-C LEDUV Lamp
5. Side aluminum x-frame

Working Principle

1. UVeco Product Elevator internal installation
2. Switch to sterilization state when motion is detected in standby state
3. Switch to standby state after 30 seconds of sterilization
4. If no motion is detected for 30 minutes, it switches to the sterilization state and sterilizes for 30 seconds

Advantages

1. Can be installed by maintaining existing facilities
2. Improvement of difficulty in reading Braille for the disabled when using antibacterial film
3. Periodic sterilization
4. Promotion to attract customers and secure facility stability
5. Products that actually sterilize, not antibacterial

Sterilization Test
: COVID19 Test Results and Sterilization Power
test light source: UVC LED - 275nm 10mW / same module as UVECO EV-1 UVC LED
test distance: Distance between light source and virus 200mm
(Within about 50mm distance between UVECO EV-1 and elevator button)
test result: 30 sec – 90% / 90 sec – 99.9% sterilization immediately after exposure to light source
UVECO EV-1: When the distance to the sterilization point is within 50mm,
99.9% sterilization power is confirmed within 12.5 to 15 seconds.
Our products repeat sterilization for at least 30 seconds when motion is detected.

Sterilization test
: Escherichia coli, Salmonella, Pseudomonas aeruginosa, Staphylococcus aureus
test light source: UVC LED - 275nm 10mW (Number: 12)
test distance: Distance between light source and strain
: within 150mm / Irradiation distance: 11mm / Product size: 150mm(W) X 330mm(L)
test requirements: Sterilization confirmation / irradiation time (40 sec, 60 sec, 75 sec, 90 sec)
by dividing the strain into 1 point and 2 point
testing body: Point Engineering Co., Ltd. (UVON UVC LED manufacturer) / Daesung Electric Co., Ltd.
test result: Immediately after light exposure
45 sec – 98% / 60 sec –99.9% / 75 sec – 99.9% sterilization / 90 sec – 99.9% sterilization

Safety
: UV irradiance measurement results
test light source: UVC LED - 270nm 10mW (Number: 12) test distance: 10mm / 20mm / 30mm from the bottom of the button panel
test result: UV light emission 10mm (0.01 mJ/cm2) / 20mm (0.01 mJ/cm2) / 30mm (0.01 mJ/cm2)
UVECO EV-1: UV illuminance is not measured from a distance of about 10mm
(0.01 mJ/cm2 – ambient influence error value) from the front of the product.

Model	UVECO EV-1 Main (for OPB and the disabled)
Sterilization LED Wavelength	275nm
Product size	W 312(MAX) x H 1,000(MAX) x D 15 mm
Product weight	450g (based on the 10th floor elevator)
Color	Gold, Silver, Black

Company Overview